Project

General

Profile

Bug #1121

hdd's not detected after boot

Added by Ian - over 8 years ago. Updated over 7 years ago.

Status:
Closed
Priority:
Important
Assignee:
-
Category:
Middleware
Target version:
-
Seen in:
Severity:
New
Reason for Closing:
Reason for Blocked:
Needs QA:
Yes
Needs Doc:
Yes
Needs Merging:
Yes
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:
ChangeLog Required:
No

Description

this is the result of the camcontrol devlist:

<GoldStar CD-ROM CRD-8482B 1.01> at scbus4 target 0 lun 0 (pass0,cd0) <WDC WD400BB-75DEA0 05.03E05> at scbus4 target 1 lun 0 (pass1,ada0)

the log file is at the following pastebin address: http://pastebin.com/GuV5JBP5

everything is fine in previous releases but not in any of the 8.0.x releases.

History

#1 Updated by Alexander Motin over 8 years ago

It looks like there is something wrong with interrupt delivery for the SATA controller:
ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000
controller sees command completion and sets interrupt flag, but driver doesn't receive it.

Try to disable MSI interrupts for the controller by adding to /boot/loader.conf line
hint.ahci.0.msi=0
or just try to set it during boot via loader prompt.

Also you may try to update system BIOS.

#2 Updated by William Grzybowski over 7 years ago

Any updates?

#3 Updated by William Grzybowski over 7 years ago

  • Status changed from Unscreened to Closed

Closing for timeout as the reporter can no longer give details, also pastebin link has expired.

Also available in: Atom PDF