Project

General

Profile

Bug #21984

cannot select ZVol on VM UI for a VM device and mode selection cant't be switched to VirtIO

Added by Peter Hood over 4 years ago. Updated about 4 years ago.

Status:
Resolved
Priority:
Important
Assignee:
Marcelo Araujo
Category:
Middleware
Target version:
Severity:
New
Reason for Closing:
Reason for Blocked:
Needs QA:
Yes
Needs Doc:
Yes
Needs Merging:
Yes
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:
ChangeLog Required:
No

Description

Can't select a ZVol while setting up a DISK device for a VM from the designated Combo Box.
The selection field show just empty.
Additional if i select VirtIO in the Mode Field for the DISK device the selection will not be saved but AHCI Mode stays selected.
(although there is a message on the top of the UI saying: device updated succesfully)

Associated revisions

Revision 1bc160e6 (diff)
Added by Marcelo Araujo over 4 years ago

fix(vm): Allow users to select virtio(4) as a disk type. Ticket: #21984

History

#1 Avatar?id=14398&size=24x24 Updated by Kris Moore over 4 years ago

  • Assignee set to Marcelo Araujo
  • Priority changed from No priority to Important
  • Target version set to 9.10.3

#2 Updated by Marcelo Araujo over 4 years ago

  • Status changed from Unscreened to Screened

#3 Updated by Marcelo Araujo over 4 years ago

About the zvol, have you created a zvol inside your pool?
The mode selection I just fixed.

Best,

#4 Updated by Marcelo Araujo over 4 years ago

  • Status changed from Screened to 15

#5 Updated by Peter Hood over 4 years ago

Ooops, you are right, i created a datastore but not a zvol inside the pool.

After creating a zvol the problem was solved.

sorry, problem was sitting 25" in front of display :)

#6 Avatar?id=14398&size=24x24 Updated by Kris Moore over 4 years ago

  • Status changed from 15 to Reviewed

Sounds good! I've reviewed this change as well. Thanks guys!

#7 Updated by Marcelo Araujo over 4 years ago

  • Status changed from Reviewed to Resolved

It is in our MASTER already.
So, I'm closing this ticket.

#8 Avatar?id=14398&size=24x24 Updated by Kris Moore over 4 years ago

  • Target version changed from 9.10.3 to 11.0

#10 Updated by Vaibhav Chauhan about 4 years ago

  • Target version changed from 11.0 to 11.0-RC

Also available in: Atom PDF