Project

General

Profile

Feature #24604

Add support for HBA 9400-8i (P2 driver)

Added by Bogus Sobczak over 3 years ago. Updated about 3 years ago.

Status:
Resolved
Priority:
Important
Assignee:
Alexander Motin
Category:
OS
Target version:
11.1-BETA1
Estimated time:
Severity:
New
Reason for Closing:
Reason for Blocked:
Needs QA:
No
Needs Doc:
Yes
Needs Merging:
Yes
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:

For simple test:
Motherboard: Asus Maximus Formula VII,
Storage controller: HBA 9400-8i.
HDD: 3x (2 TB)

Description

Dears,
I am completely newbie with FreeNAS. For test new hardware HBA 9400-8i, I have installed FreeNAS 11. I think, the new controller should be recognized with ease and install driver but without success.
Maybe I have to do something more than I know.

https://www.broadcom.com/products/storage/host-bus-adapters/sas-nvme-9400-8i#downloads

When motherboard starts with the controller I can see recognized 3x HDD connected to the controller HBA 9400-8i.

Please, let me know how to fix it.
Thanks

Associated revisions

Revision 9de00136 (diff)
Added by Dru Lavigne over 3 years ago

Mention updated drivers. Ticket: #24604 Ticket: #24820 Ticket: #25709

History

#1 Updated by Alexander Motin over 3 years ago

  • Tracker changed from Bug to Feature
  • Status changed from Unscreened to Resolved
  • Priority changed from No priority to Important
  • Target version set to 11.1

Support for tri-mode LSI adapters was just recently added to FreeBSD. That code will be part of further FreeNAS 11.1, and is already present in recent nightly development builds, which you may try, if you wish.

#2 Updated by Bogus Sobczak over 3 years ago

I tired update to last nightly build (FreeNAS-11-MASTER-201706150433 (080e833)), but still there aren't new controller or disks.
Second test, fresh install from the last nightly build, and it is the same, without recognized LSI adapter.

The problem still exist.

Is it possible update driver, or configure the system to use 9400-8i in FreeNAS 11.0?

#3 Updated by Bogus Sobczak over 3 years ago

New nightly build FreeNAS-11-MASTER-201706200459 (a885982), and HBA 9400-8i is available.

#4 Updated by Alexander Motin over 3 years ago

"Available" I understand as "working". OK, Great!

#5 Updated by Bogus Sobczak over 3 years ago

Yes, you are correct. It worked for that test.

#6 Updated by Dru Lavigne over 3 years ago

  • Subject changed from FreeNAS does not see HBA 9400-8i to Add support for HBA 9400-8i

#7 Updated by Dru Lavigne over 3 years ago

  • Target version changed from 11.1 to 11.1-BETA1

#8 Updated by Bogus Sobczak over 3 years ago

There is newer firmware and driver - phase 3.
[[https://www.broadcom.com/products/storage/host-bus-adapters/sas-nvme-9400-8i#downloads]]
Does 11.1 beta1 include the update?

#9 Updated by Alexander Motin over 3 years ago

No. 11.1-BETA1 includes the latest driver version present in base FreeBSD, which is P2 -- "15.03.00.00-fbsd". I hope Broadcom committer will handle that themselves at some point.

#10 Updated by Dru Lavigne over 3 years ago

  • Subject changed from Add support for HBA 9400-8i to Add support for HBA 9400-8i (P2 driver)

#11 Updated by Bonnie Follweiler about 3 years ago

  • Needs QA changed from Yes to No

#12 Updated by Bonnie Follweiler about 3 years ago

  • QA Status deleted (Not Tested)

Also available in: Atom PDF