Project

General

Profile

Bug #25140

Display multipath disks in View Disks

Added by Ian Davidson over 1 year ago. Updated 11 months ago.

Status:
Resolved
Priority:
Important
Assignee:
William Grzybowski
Category:
GUI (new)
Target version:
Seen in:
Sprint:
Severity:
New
Backlog Priority:
Reason for Closing:
Reason for Blocked:
Needs QA:
No
Needs Doc:
Yes
Needs Merging:
Yes
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:
ChangeLog Required:
No

Description

Main concerns are that I have no visibility into what the drives' serial number is in the event of a failure, and that something else could be wrong that I am not seeing.

History of events:
- 24 SAS drives connected to 2 LSI 9210-8i HBA in IT mode. All drives recognized in "View Disks" as well as "View Multipaths"
- Found that the HBA's were running two different firmware versions so updated both to latest firmware version 20.00.07.00.
- Volume/Pool was then unable to be imported so we created a new volume.
- Now, "View Disk" displays "No entry found" and unable to view any serial numbers from the GUI.
- The volume is still usable and in tact, as well as the "View Multipaths" option displaying all drives/paths.
- Have done a factory restore, updated from version 9.2 to 11.0-U1 with no ability to "View Disks"

Here is the output of zpool status:
pool: Vol1
state: ONLINE
scan: scrub repaired 0 in 0h0m with 0 errors on Thu Jul 13 09:41:01 2017
config:

NAME                                            STATE     READ WRITE CKSUM
Vol1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/03b855d3-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/05548a75-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
gptid/06f8320a-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/0897b400-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
gptid/0a37ec11-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/0bd67205-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-3 ONLINE 0 0 0
gptid/0d7d08d2-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/0f1f9b8d-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-4 ONLINE 0 0 0
gptid/10c68abe-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/12688b4d-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-5 ONLINE 0 0 0
gptid/1413eefa-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/15b6e197-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-6 ONLINE 0 0 0
gptid/175f3466-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/1901486c-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-7 ONLINE 0 0 0
gptid/1aaed30f-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/1c548c83-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-8 ONLINE 0 0 0
gptid/1e01ce05-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/1fa6b50e-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-9 ONLINE 0 0 0
gptid/2157e194-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/22fe7586-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-10 ONLINE 0 0 0
gptid/24ac986e-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/2652663d-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
mirror-11 ONLINE 0 0 0
gptid/28031476-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0
gptid/29a6f621-5d87-11e7-ab90-0025904a5dda ONLINE 0 0 0

errors: No known data errors

pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME        STATE     READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0

errors: No known data errors

multipaths_screenshot.png (114 KB) multipaths_screenshot.png Ian Davidson, 07/14/2017 09:30 AM
single_drive_view_disks.JPG (28.4 KB) single_drive_view_disks.JPG Ian Davidson, 07/14/2017 09:30 AM
11779
11780

Associated revisions

Revision ec3e5791 (diff)
Added by William Grzybowski about 1 year ago

fix(gui): show multipath disks in View Disks

For some reason we were excluding multipath disks from showing in View
Disks, but it seems to be perfectly plausible to do so, so one can
control properties in them.

Ticket: #25140

Revision 6c62cb69 (diff)
Added by William Grzybowski about 1 year ago

fix(middlewared): sync multipath on disk attach

Ticket: #25140

Revision 98c5eb67 (diff)
Added by William Grzybowski about 1 year ago

fix(gui): show multipath disks in View Disks

For some reason we were excluding multipath disks from showing in View
Disks, but it seems to be perfectly plausible to do so, so one can
control properties in them.

Ticket: #25140

Revision 089e9f2a (diff)
Added by William Grzybowski about 1 year ago

fix(middlewared): sync multipath on disk attach

Ticket: #25140

History

#1 Updated by Ian Davidson over 1 year ago

  • File debug-WaffleSAN2-20170714085345.txz added

#2 Updated by Dru Lavigne over 1 year ago

  • Status changed from Unscreened to 15
  • Seen in changed from Unspecified to 11.0-U1

Ian: please attach a screenshot of Storage -> View Disks and Storage -> View Multipaths.

#3 Updated by Ian Davidson over 1 year ago

11779
11780

Screenshot attached.

One update:
I removed "multipath/disk 1" to simulate a failure (test alert, replacement) and then reinserted/replaced to un-degrade the pool. Now when I look at view disks I see da24 listed (also attached).

#4 Updated by Dru Lavigne over 1 year ago

  • Category changed from 129 to 2
  • Status changed from 15 to Unscreened
  • Assignee changed from Release Council to William Grzybowski

#5 Updated by William Grzybowski over 1 year ago

  • Status changed from Unscreened to 15
  • Priority changed from No priority to Important
  • Target version set to 11.1

Would you be willing to jump in a team viewer session next week to debug this?

#6 Updated by Ian Davidson over 1 year ago

Available today or next week.

#7 Updated by William Grzybowski over 1 year ago

Ian Davidson wrote:

Available today or next week.

Unfortunately I dont have time today. I will contact you again next week. Thanks!

#8 Updated by William Grzybowski over 1 year ago

  • Status changed from 15 to Screened

#9 Updated by William Grzybowski about 1 year ago

Hello, do you have time today?

From 4PM UTC to 8PM UTC?

william at ixsystems com

#10 Updated by Ian Davidson about 1 year ago

Hello, 6PM UTC would be ideal.

#11 Updated by William Grzybowski about 1 year ago

Ian Davidson wrote:

Hello, 6PM UTC would be ideal.

Great, I'll be waiting for the team viewer credentials at that time.

Thanks

#12 Updated by Ian Davidson about 1 year ago

#13 Updated by William Grzybowski about 1 year ago

  • Subject changed from View Disk displays "No entry found" to View Disks dos not show multipath disks

#14 Updated by William Grzybowski about 1 year ago

  • Status changed from Screened to Ready For Release

#15 Updated by Dru Lavigne about 1 year ago

  • File deleted (debug-WaffleSAN2-20170714085345.txz)

#16 Updated by Dru Lavigne about 1 year ago

  • Private changed from Yes to No

#17 Updated by Dru Lavigne about 1 year ago

  • Subject changed from View Disks dos not show multipath disks to Display multipath disks in View Disks

#18 Updated by Dru Lavigne about 1 year ago

  • Target version changed from 11.1 to 11.1-BETA1

#19 Updated by Dru Lavigne 12 months ago

  • Status changed from Ready For Release to Resolved

#20 Updated by Joe Maloney 11 months ago

  • Needs QA changed from Yes to No
  • QA Status Test Passes FreeNAS added
  • QA Status deleted (Not Tested)

Also available in: Atom PDF