Project

General

Profile

Bug #34276

NVMe SMART monitoring workaround

Added by Vladimir Vinogradenko over 2 years ago. Updated over 2 years ago.

Status:
Done
Priority:
No priority
Assignee:
Vladimir Vinogradenko
Category:
Middleware
Target version:
11.1-U6
Seen in:
TrueNAS - TrueNAS 11.1-U5
Severity:
Med High
Reason for Closing:
Reason for Blocked:
Needs QA:
No
Needs Doc:
No
Needs Merging:
No
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:
ChangeLog Required:
No

Description

Until /dev/nvd* <-> /dev/nvme* mapping is figured out.

If SMART monitoring is enabled for at least one /dev/nvd*, add SMART config for all /dev/nvme*

History

#1 Updated by Vladimir Vinogradenko over 2 years ago

  • Status changed from Unscreened to Blocked
  • Severity changed from New to Med High
  • Reason for Blocked set to On hold

On hold until TrueNAS 11.1-U5 comes out

PR: https://github.com/freenas/freenas/pull/1318

#2 Updated by Dru Lavigne over 2 years ago

  • Target version changed from TrueNAS-11.1-U6.1 to 11.1-U6

#3 Updated by Vladimir Vinogradenko over 2 years ago

  • Status changed from Blocked to Ready for Testing

#4 Updated by Dru Lavigne over 2 years ago

  • Reason for Blocked deleted (On hold)
  • Needs Doc changed from Yes to No
  • Needs Merging changed from Yes to No

#6 Updated by Bonnie Follweiler over 2 years ago

  • Status changed from Ready for Testing to Passed Testing
  • Needs QA changed from Yes to No

Tested in FreeNAS 11.1-U6 Internal6
The last part of the results of cat /usr/local/etc/smartd.conf|more are:

/dev/da23 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py\
-s S/(00)/../(7)/(23)\

/dev/da22 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py\
-s S/(00)/../(7)/(23)\

/dev/nvme0 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py

#7 Updated by Dru Lavigne over 2 years ago

  • Status changed from Passed Testing to Done

Also available in: Atom PDF