Project

General

Profile

Bug #77341

Always use upsmon as primary indicator of UPS service status

Added by Bug Clerk almost 3 years ago. Updated over 2 years ago.

Status:
Done
Priority:
No priority
Assignee:
Vladimir Vinogradenko
Category:
Services
Target version:
Seen in:
Severity:
New
Reason for Closing:
Reason for Blocked:
Needs QA:
No
Needs Doc:
No
Needs Merging:
No
Needs Automation:
No
Support Suite Ticket:
n/a
Hardware Configuration:
ChangeLog Required:
No

Description

Seen in FreeNAS-11.2-U2-INTERNAL85

I disconnected the UPS and FreeNAS had automatically turned off the service after testing.
I am still getting the NOCOMM - ups email and my console is showing that it is continuing to check:
Feb 7 08:06:33 fn07 upsmon2680: UPS [ups]: connect failed: Connection failure: Connection refused
Feb 7 08:06:38 fn07 upsmon2680: UPS [ups]: connect failed: Connection failure: Connection refused
Feb 7 08:06:43 fn07 upsmon2680: UPS [ups]: connect failed: Connection failure: Connection refused
Feb 7 08:06:48 fn07 upsmon2680: UPS [ups]: connect failed: Connection failure: Connection refused

To assist in further pinpointing the issue I will reboot the system and see if that clears it up.


Related issues

Copied from FreeNAS - Bug #74172: FreeNAS is still trying to connect to the UPS, and sending NOCOMM - ups emails, after the service has been stopped and the UPS has been disconnectedDone

History

#1 Updated by Bug Clerk almost 3 years ago

  • Copied from Bug #74172: FreeNAS is still trying to connect to the UPS, and sending NOCOMM - ups emails, after the service has been stopped and the UPS has been disconnected added

#2 Updated by Bug Clerk almost 3 years ago

  • Target version changed from Master - FreeNAS Nightlies to 11.2-U3

#3 Updated by Bug Clerk almost 3 years ago

  • Status changed from Unscreened to In Progress

#4 Updated by Bug Clerk almost 3 years ago

  • Status changed from In Progress to Ready for Testing

#5 Updated by Dru Lavigne almost 3 years ago

  • Subject changed from FreeNAS is still trying to connect to the UPS, and sending NOCOMM - ups emails, after the service has been stopped and the UPS has been disconnected to Always use upsmon as primary indicator of UPS service status
  • Needs Doc changed from Yes to No
  • Needs Merging changed from Yes to No

#6 Updated by Vladimir Vinogradenko over 2 years ago

Acceptance Criteria

UPS service should not automatically turn off in the UI when UPS is unplugged.

#9 Updated by Bonnie Follweiler over 2 years ago

  • Status changed from Ready for Testing to Passed Testing
  • Needs QA changed from Yes to No

Test Passed in FreeNAS-11.2-U2-INTERNAL103

#10 Updated by Dru Lavigne over 2 years ago

  • Status changed from Passed Testing to Done

Also available in: Atom PDF